SOLDER FUME EXTRACTOR- NA/SF/80
- Home
- SOLDER FUME EXTRACTOR- NA/SF/80
+91- 96261 89418
sales@napcen.com
Mon - Fri 9.00AM to 6.00PM
Working Principle
The fume comes from the soldering
processing will be sucked into the extractor through the hood by extraction
fan. First the fume passes the 1st layer of pre-filter, the coarse particle are
remove in this filter. Then the fume enter second layer of HEPA filter, the filtration
efficiency is 99.9%. as per the indoor emission standard. The filtered air is
directly discharged to the working environment.
Main feature:-
·
It is suitable for the purification of
fume and dust generated in all kinds of Soldering applications.
·
The fume comes from the processing will
be sucked into the extractor through the hood.
·
Suction volume can be adjusted by adjusting volume valve
in suction hood.
·
Suction arm can be rotated 360° horizontally.
·
Filtration efficiency is 99.9%. (above 0.3μm).
·
high filtration performance
·
2 and 3 meter flexible suction arm are available.
·
Optional for LCD display to show air flow
and air pressure.
·
Air flow can be adjustable by key switch
and remote control.
Application:
Soldering fume extractor suitable for fume
filtration for
·
Soldering PCB Board
·
Electronic product soldering
·
Reflow soldering
·
Wave soldering
·
Selective soldering
Accessories
·
Pre Filter.
·
HEPA Filter.
·
Activated Carbon Filter.
·
Articulated flexible Arm.
·
Table mount.
·
Flexible duct.
Copyright © 2021. Napcen. All Rights Reserved