Silica Dust Collection
Silica Dust Collection
Silica is one of the most common substances found on the planet, and, accordingly, is used in countless industrial applications. It is the main ingredient in glass and is a major component of ceramic tile, cement, bricks and asphalt. It is widely used in metallurgy, agriculture and water filtration. It also appears in high-tech applications, such as fiber optics, and as a filler for paints, coatings, rubbers and plastics.
The industrial use of silica has been a hot topic, lately, due to a rule change from the Occupational Safety and Health Administration (OSHA) in early 2016. As you will see in details below, OSHA has toughened its standards for exposure to silica dust. This rule change could affect as many as 2.3 million workers in approximately 676,000 workplaces.
The industrial use of silica has been a hot topic, lately, due to a rule change from the Occupational Safety and Health Administration (OSHA) in early 2016. As you will see in details below, OSHA has toughened its standards for exposure to silica dust. This rule change could affect as many as 2.3 million workers in approximately 676,000 workplaces.
Exposure Risks for Silica Dust
Silica dust is inhaled into the lungs, where it is implicated in lung cancer as well as chronic bronchitis and other respiratory diseases. As the substance makes its way from the lungs through the body, silica can also damage other bodily systems, most notably the kidneys.
Exposure can also lead to a serious disease caused by damage to the lining of the lung sacs. Acute silicosis, caused by severe exposure, can cause the lungs to become inflamed and fill with fluid, creating a medical emergency. Chronic silicosis develops with even low-level exposure over time, reducing lung capacity until sufferers need oxygen to survive.
Because of the severity of silica dangers, manufacturers can’t settle for filtering out 80% or so of the dust, as they might when working with wood dust or other non-carcinogenic materials. With silica, a manufacturer needs to aim for removing 99.9% of the dust.
Exposure can also lead to a serious disease caused by damage to the lining of the lung sacs. Acute silicosis, caused by severe exposure, can cause the lungs to become inflamed and fill with fluid, creating a medical emergency. Chronic silicosis develops with even low-level exposure over time, reducing lung capacity until sufferers need oxygen to survive.
Because of the severity of silica dangers, manufacturers can’t settle for filtering out 80% or so of the dust, as they might when working with wood dust or other non-carcinogenic materials. With silica, a manufacturer needs to aim for removing 99.9% of the dust.
Regulations for Silica Dust
OSHA is the primary agency tasked with regulating silica dust. The administration recently made waves when it announced it was cutting permissible exposure levels (PELs) by half. You can find the final ruling here, but these are the basic facts: the PELs for crystalline silica have been lowered to 50 micrograms per cubic meter of air (μ/cu.m) as an 8-hour time-weighted average, down from the currently allowable 100 μ/cu.m TWA. The new rule takes effect June 23, 2016, and employers have until June 2018 to comply. The rule also outlines requirements for assessing and monitoring exposure, protecting employees, mitigation, record keeping and employee communication.
OSHA has made this rule change because scientific evidence shows that the previous exposure limits were not keeping workers safe. OSHA estimates that the new rule could prevent 600 deaths and 900 new cases of silicosis each year.
The American Conference of Governmental Industrial Hygienists (ACGIH) recommends a lower exposure limit for silica: 25 micrograms per cubic meter. This lower limit is not a surprise, since ACGIH guidelines are usually more strict than OSHA standards. Many leading manufacturers, however, strive to meet ACGIH guidelines.
As with other OSHA regulations, failure to comply can bring serious fines. The administration can assess fines up to hundreds of thousands of dollars every time an offender is cited.
OSHA has made this rule change because scientific evidence shows that the previous exposure limits were not keeping workers safe. OSHA estimates that the new rule could prevent 600 deaths and 900 new cases of silicosis each year.
The American Conference of Governmental Industrial Hygienists (ACGIH) recommends a lower exposure limit for silica: 25 micrograms per cubic meter. This lower limit is not a surprise, since ACGIH guidelines are usually more strict than OSHA standards. Many leading manufacturers, however, strive to meet ACGIH guidelines.
As with other OSHA regulations, failure to comply can bring serious fines. The administration can assess fines up to hundreds of thousands of dollars every time an offender is cited.
Solutions for Silica Dust
Napcen has decades of experience controlling dusts of all kinds, from high volumes of nuisance dusts to the finest particulates of highly dangerous metallic dusts. Napcen’s Fusion Series of dust collectors are ideal for abrasive blasting applications due to their rugged cabinet design and powerful dust collection capabilities. Engineered from the ground up using state-of-the-art CFD simulation technology, Fusion Series collectors provide the flexibility, efficiency and performance you need to protect workers.
If your operation is changing or filled with confusing variables, Napcen’s Mapping process can help you identify your specific needs and the best solution available. Whether you need a source capture solution to clean up a specific location or process, or an ambient capture system to clean the air across an entire facility, Napcen has the expertise and equipment options to solve the problem.
If your operation is changing or filled with confusing variables, Napcen’s Mapping process can help you identify your specific needs and the best solution available. Whether you need a source capture solution to clean up a specific location or process, or an ambient capture system to clean the air across an entire facility, Napcen has the expertise and equipment options to solve the problem.